Standard Mesh Angle Bead

Standard Mesh Angle Bead Galvanised in 2.4m and 3m lengths.Designed to prevent chipping and cracking to vunerable corners.Use with 2 coat plaster application.45mm wing, 13mm plaster depth.

.Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.

Standard Mesh Angle Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.

This bead can also be supplied in stainless steel for external applications.

We offer home and site delivery, however this will only be possible if the surface is firm and level, such as concrete, block paving and tarmac etc and at the driver’s discretion. The pallet truck will not operate on any uneven or soft surface such as grass or gravel or on steep slopes. If the pallet is left at the home and site kerb side it will then be your responsibility to transfer the product to your preferred area. If there is an access issue for large vehicles (the size of a refuse lorry etc) on the roads leading to your property, please let us know before you place your order.